HC5-2

Microprocessor controls maintain temperature and humidity in approximate ranges of 35-70°C and 40-95%RH, respectively. An extra large water jacket minimizes condensation inside the chamber and supports optimum uniformity conditions.

A low-pressure water vapor generator, injecting saturated water vapor into the recirculating air duct, controls chamber humidification. This process is preferable to steam generation because steam introduces additional heat to the chamber atmosphere which then compromises temperature control. Uniform temperature and humidity are maintained using the same horizontal air flow technology employed in the HC5-2 oven family.

Model

HC5-2

Description

HC5-2 Humidity Test Cabinets provide a controlled environmental chamber for a wide range of industrial and biotechnical testing applications. All chambers include:

  • Microprocessor Controls
  • Seamless Corrosion-Resistant Stainless Steel Interior
  • High Limit Back-Up Controller

Capacity

5.5 cu. Ft.

Interior Dimensions WxDxH in. (cm)

19.5 x 18.5 x 24.75 (49.5 x 47.0 x 62.9)

Exterior Dimensions WxDxH in. (cm)

25.0 x 26.25 x 46.25 (63.5 x 66.7 x 117.5)

Temperature Range

10° above ambient to 70° C

Temperature Uniformity

+/- 0.35° at 37°C

Volts

220V

Watts

1150W

Amperage

4.3A

Jacket Type

Water

Relative Humidity Range

Ambient +10%, -95%

Relative Humidity Uniformity

+ / - 1.5%

Shelving

6 Supplied (12 Maximum)