Panel Heaters Quartz Time Ceramic Infrared

Heaters designed to produce heat by electromagnetic waves that require no heat medium and offer maximum efficiency.

Applications:  
  • Thermoforming
  • Paint, epoxy or resin curing
  • Heating moving webs
  • Textiles and Non-wovens
  • Food warming
  • Processing rubber and plastics
  • Roll heating
  • Preheating
ProTherm Industries offers custom engineered designs to meet your exact requirements.
Panel Heaters

Convenient modules
that can be easily zoned.

Series CB – Glass/Ceramic faced panel heaters from 5 – 25 watts/in˛. Up to 1350°F. Heat up time is approx. 4 minutes.

Series CV - Vycor® faced panel heaters from 20-45 watts/in˛. Up to 1600°F. Heat up time is approx. 4 minutes.

Series 40 - Vycor® faced narrow panel heaters up to 40 watts/in˛ and 1500°F. Heat up time is approx. 2-4 minutes. 9 Stock sizes and 8 voltages.

Series FS – Serpentine metallic element heater with stainless steel screen to protect the elements. Up to 55 watts/in˛ and 2100°F. Heat up time is approx. 25- 35 SECONDS.

Series FSA – FS heater with perforated face for air movement. Provided with blowers and collars.

Series F – Corrugated metallic element heater with stainless steel screen to protect elements. Up to 50 watts/in˛ and 1600°F. Heat up time is approx. 10-15 SECONDS.

Series FB – Resistance coils supported in quartz fabric refractory board faced panel heaters. Up to 25 watts/ in˛ and 1800°F. Heat up time is approx . 7 minutes.

Series G - Black Ceran® glass faced panel heaters up to 20 watts/in˛ and 1800°F. Heat up time is approx. 7 minutes.

Series Q – High purity quartz faced panel heaters up to 65 watts/in˛ and 1800°F. Heat up time is approx. 7 minutes.

Series T – Panel heater made from 5/8" dia. quartz tubes. Up to 70 watts per lineal inch and 1800°F. Heat up time is approx. 30 SECONDS.

Back to Top

Quartz Tube
Applications where instantaneous heat up
and cool down is required.
  • Clear or Translucent tubing
  • 3/8", ˝", 5/8" 7/8" or 1" diameters
  • Standard or mult-wound
  • Internal ceramic reflector, gold reflector or no reflector
  • Multiple terminations are available.

Back to Top
Ceramic Infrared
Applications requiring 3-4 micron wavelengths and heat over large area.
  • Rated at 96% infrared energy efficient
  • Estimated life in excess of 10,000 hours
  • Temperature indicating decal
  • Aluminized steel reflectors or housing to hold one or a combination of ceramic heaters
  • A variety of flat, trough, rectangular or square configurations with multiple wattages.
  • 120, 240 and 480 standard voltages

Back to Top

501 Metroplex Drive - Building 315, Nashville, TN 37211
1-800-811-3798   615-834-4044  Fax 615-834-5834
Email: protherm@bellsouth.net